PT201 series smart card chip reader is a kind of reader with the function of detecting the electric performance developed by PIOTEC. The reader adopts an advanced embedded system design, an open system architecture, and fully supports secondary development, it can test the contact smart card, smart card module and semiconductor chip, which can meet the high-speed and high-stability requirements of all kinds of smart card manufacturers.
|Master CPU：32bit ARM9;
Dominant Frequency: 454MHz
ISO7816 HOST Interface
Max. Output Current
|65mA ClassA/50mA ClassB/30mA ClassC，Maximum current support 150mA
|Default frequency is 3.57MHz;
Supporting any value between 1-20MHZ（Adjustment accuracy:1KHz）
|10M/100M Ethernet interface integrated;
Power supply interface integrated
|The manual and automatic mode of PPS can be configured；
Baud rate can be supported up to 460.8Kbps(PPS 97)
|Smart card reader functional interface
|One ISO7816 standard HOST interfaces； Using MDR26 terminal
ISO7816 Interface Output Voltage
|Supporting CLASS A\B\C
|ISO7816 Interface Operating Voltage
|Supporting 0~5.5V supply voltage adjustable
|Supporting T=0，capturing reponse data automatically can be settable (default off)
|External Supply Voltage
Supporting open short test(The current applied to the pin is adjustable);
Supporting leakage test on all contacts(pins);
Supporting measurement of current consumption;
Supporting FVMI and FIMVC7 drivability test;
Pin voltage Vih and Vil are adjustable
|ESD protection, short circuit protection and overcurrent protection supported
|Transparent operation of IC card interface chip,the operating mode can be modified directly
|less than 3W
|IP address can be set up by dial switch;Any IP value between 0-255 can be configured
|Built-in Linux system makes secondary development flexible and applications can be customized easily
Ensure data privacy with Linux embedded operating system.
Adjustable personalization frequency up to 20MHz, The use of FM mode can greatly improve the speed of data writing.
Adopting TCP/IP network communication protocol,
Conforming to ISO/IEC 7816-3 standard and supporting T=0,T=1 protocol.
Secondary development fully supported,
Executing chip initialization,pre-personalization and personalization with high efficiency,
High efficiency power design with lower power consumption and lower heat.
Contact Piotec for Smart Card Solution